Choose your light

SectorsWorkplaces

Lighting for workplacesWorkplaces

Light likes work. In good light you see the detail, you do not lean over the bench and you finish the shift less tired.

Assembly workstation in FREI light, FREI render
Desk
500 lx
Precision
750 lx and more
Glare
UGR 19
Colours
CRI 98

Description

Light
likes work.

An assembly table, a design engineer's desk, a quality control station. Everywhere there, light from the ceiling is not enough. You need light on the bench, even, without shadows and without glare.

  • How many mistakes happen simply because it is hard to see?
  • Why do your eyes and neck hurt after a shift?
  • At the workstation, can you see the colour of a wire, or do you have to guess?

How it works

Light on the bench

Light
Colour rendering
Assembly workstation: a line above the workstation, CRI 98, FREI render
Just right: a line above the workstation and CRI 98. The whole bench is evenly bright and every wire has its own colour.
A line above the benchlinear single made to the size of the table, 52° optics for the whole bench.
CRI 98The colours of wires, paints and materials without guessing.
No glareThe LED sits in the optics, so your eyes look at the work, not at the luminaire.

Why light above the workstation? A luminaire under the hall ceiling shines from four metres, and the shelves and the worker cast shadows on the bench. A line above the table shines from close up, evenly over the whole surface, and uses less electricity than brightening the whole hall.

FREI render: the same workstation, each light calculated separately. CRI 80 is shown approximately, and colours on screen are approximate.

Standard

How much light
work needs.

500 lxwriting, reading, computer work
750 lxtechnical drawing and precision work
UGR 19the maximum in an office and at a workstation

Values from the EN 12464-1 standard. In the design we calculate them for each workstation separately.

For companies

Workstations
in four steps.

  1. 01

    Measurement

    We measure the light on every bench, not in the middle of the hall.

  2. 02

    Design

    Lux, glare and colour for every type of work.

  3. 03

    Fitting

    Lines made to the size of the tables, power supply and controls.

  4. 04

    Daily rhythm

    The colour changes with the time of day, on the night shift too.

Luminaires

What shines
above the work.

linear single linear luminaire

linear single

Above the table. Made to measure, CRI 98.

mB(e)lla luminaire

mB(e)lla

Above the whole room. 38 W, CRI 98.

linear single
20–30 W/m, CRI 98, optics 36°, 52°, 80°, length made to measure
mB(e)lla
38 W, CRI 98, optics 30°, 60°, 90°
Hall
Maestro, 75 W, 14,625 lm, 195 lm/W
Warranty
5 years + 2 years
Production
FREI, Olsztyn

Questions

Your most common questions.

How many lux does a workstation need?

500 lx for writing, reading and computer work. 750 lx for technical drawing and precision work. Glare at most UGR 19. Values from the EN 12464-1 standard.

Why light above the workstation and not only from the hall ceiling?

A luminaire under the ceiling shines from four metres, and the shelves and the worker cast shadows on the bench. A line above the table shines from close up, evenly, and uses less electricity than brightening the whole hall.

Which luminaire above an assembly table?

linear single made to the size of the table (20–30 W/m, CRI 98), 52° optics for the whole bench.

Why CRI 98 for assembly work?

To see the colours of wires, paints and materials without guessing.

Choose the light
for your work.

Designed and made by FREI in Olsztyn. You buy from the manufacturer, with no middlemen.