Choose your light

CNC turning and milling in OlsztynPrecision we
use ourselves.

The housings of our luminaires are made on these machines. Your part gets the same. Quote within 24 hours on working days.

Turning

First there is
an aluminium bar.

The tool follows the contour.
To a hundredth.

Thread, groove, radius.
One clamping.

HAAS ST-20YY axissub-spindlebar up to Ø 64 mm

Close up. The gold insert follows the contour and the chip comes off in a spiral. The finished part is left with a smooth, shiny surface.

Waiting three weeks for a quote on a part?

Told the minimum is 500 pieces when you need 20?

Your supplier does not answer when you ask about tolerances?

With us, a quote within 24 hours.

Milling

From a solid block
of aluminium.

The end mill cuts
groove after groove.

This is how a
luminaire heat sink is made.

HAAS VF-2SS4 axes762 × 406 × 508 mm

Close up. Three flutes, more than ten thousand revolutions per minute. Chips fly to the sides and the groove wall is smooth straight away.

Finished

From bar and from block.
Straight to assembly.

Finished threaded aluminium sleeve
From bar. A sleeve with a thread, a groove and a radius. One clamping.
Finished heat sink milled from an aluminium block
From block. A luminaire heat sink, five grooves, one operation.

Advantage

Why with us.

The same machines as for our luminaires

We mill and turn FREI housings on them. Your part gets the same precision and the same inspection.

Quote within 24 hours

Send a drawing or a 3D model. You get an answer from a person who knows the machine, not from a form.

Mechanics and electronics in one place

We mill the housing, solder the board on our own SMD line and assemble everything under one roof.

HAAS ST-20Y lathe

HAAS ST-20Y

Turning with a Y axis and a sub-spindle. Bar up to Ø 64 mm.

HAAS VF-2SS machining centre

HAAS VF-2SS

4-axis milling. Working area 762 × 406 × 508 mm.

Get a quote for your part online

Upload a STEP file at cnc.frei-light.com and you will see the price straight away.

CNC hall: ul. Arnolda 5, 11-041 Olsztyn, Poland · +48 500 297 433 · cnc@frei-light.com